HNL’s AQ-200 affords high performance within a flexible and cost-effective package. Sensors can be integrated that measure temperature, humidity, wind speed, wind direction, environmental noise, solar radiation and other meteorological parameters. Data is stored on an SD card and remotely accessible in real-time via GSM modem, low power radio, Ethernet or other communications.
The AQ-200 Air Quality Station meets the global trend towards the real-time measurement of air quality in the micro-environment. This is driven by the need to answer important questions in localized areas of human habitation using newer, smaller, lower cost, intelligent measurement technology linked by inexpensive network communication systems.
Specification
| Display |
A) H2S
B) NO
C) NO2
D) O3
E) CO
F) SO2 |
0 – 25 PPM (0-15000 microgram/m3)
0 – 20 PPM (0-15000 microgram/m3)
0 – 20 PPM (0-25000 microgram/m3)
0 – 02 PPM (0-3000 microgram/m3)
0 – 50 PPM (0-15000 microgram/m3)
0 – 20 PPM (0-30000 microgram/m3) |
| Resolution |
3 PPB |
|
Particulate Monitor Module
Range
Lowest Detection
Accuracy
Precision
Sharp Cut Points
Power |
Forward light scatter nephelometer
0-6000 µg/m3
0.01 µg/m3
8% NIOSH 0600
3µg/m3
PM1/PM2.5/PM10
5.2W |
|
Temperature & Humidity Module
Temperature
Humidity
Accuracy@25 °C
Resolution T
Resolution RH
Power |
-20 °C to +100 °C
0-100% RH
+/-0.3 °C / +/-2% RH
0.01 °C
0.1% RH
0.05 W |
|
Control Module
Data Storage
Sampling Rate
Communication
Display
Diagnostic
Power |
1 GB
2-255 min
RS 232
4×20
Yes
5.8W |
|
| Environmental Operating Range |
-20 °C to 50 °C 10 to 90% RH (non condensing) |
|
| Power Requirements |
24 V DC (power subject to configuration) AC power module 100 – 250 VAC |
|
| Standard Enclosure |
Fibre reinforced polycarbonate / IP66 NEM A4 Thermal insulation in internal walls |
|
| Weight |
15-25 Kg (subject to configuration) |
|
| Other Sensor Options |
Noise Sensors / Particulate counters Meteorological sensors |
|
| Enclosure Options |
Mounting accessories Metal enclosures |
|
Note: Specifications and Features will vary with application. The above are established and validated during design but are not to be construed as test criteria for every product. Due to HNL’s commitment to research, design and product improvement, specifications are subject to change without notice.
Reviews
There are no reviews yet.