Absolute Trace Moisture Analyzer DP-201

NP12NP12

Absolute Trace Moisture Analyzer DP-201

Designed to make the task of trace oxygen analysis easier, faster and more precise than ever before

  • Insta recovery advanced micro fuel cell sensor
  • Display gas concentration, units
  • Extensive self-diagnostic testing at start-up and on demand with continuous powersupply monitoring
  • Auto ranging capabilities
  • One high and one low alarm set point with corresponding relay contacts
  • Sensor failure alarm
  • Extended-life, maintenance-free sensor.one year warranty and an expected life of two years
  • Graphic display screen, continuously prompting and informing the operator
  • High resolution, accurate readings of oxygen content from low ppm levels through 25%.
Category:

Custom Engineering is HNL’s main strength. HNL maintains in-house capability to both design and manufacture a wide variety of sample systems tailored to meet out customers’ process requirements. We design sample-conditioning systems for our complete line of process analyzers .

The trace oxygen analyser can be ordered as a standard unit or as part of a larger cost effective integerated analytical system. The analyser can also be supplied designed as a “split architecture” instrument, meaning that a general purpose, panel mounted control unit for non-hazardous areas controls a remote analysis unit(Transmitter) that can operate in hazardous areas.

Specification

Indication Graphic LCD Continuous
Principle of Analysis Fast recovery, self powered diffusion, limited sealed Electrochemical Sensor
Ranges 0 – 10, 0 – 100, 0 – 1000 ppm
Accuracy ± 2 % of full scale (± 1 ppm for 0 – 10 ppm range) at a constant temperature
Diagnostics Comprehensive self testing function
Digital Interface RS-232C
Response Time 90 % in 5 to 10 seconds 90 % in 60 seconds (0 – 10 ppm range)
Reproducibility ± 1 % at a constant temperature
Sensitivity 0.5 % of FS
Alarm Setting Hi & Very High Adjustable over full range
Wetted Parts 316 Stainless Steel / Teflon
Relative Humidity 0 – 99 % RH Non-condensing
Housing Drawn Aluminium / Plastic (Optional)
Recommended Sample 0.1 to 5 Litre / Min
0 Operating Temperature 0 to 50 °C
Power 110 or 220 V (user specified), 50/60 Hz
Analog Output 4 – 20 mA isolated output 600 ohms
Sample inlet / outlet 1/4” OD Flare fittings
Mounting Panel
Mounting Dimension 390 x 132 x 230 mm

Reviews

There are no reviews yet.

Be the first to review “Absolute Trace Moisture Analyzer DP-201”
Scroll to Top