SMART TRANSMITTER STX-260

  • SMART TRANSMITTTER STX-260   download


    SMART TRANSMITTER WITH MAGNETIC PEN, REMOTE CONTROL FOR EXPLOSIVE, TOXIC, OXYGEN AND OTHER GASES, IDEAL FOR USE IN LABORATORY AND PLANT

    • Field, wall mount universal transmitter
    • Available in Weather-proof and Explosion-proof housing only
    • Standard 4-20 mA / HART transmission, compact electronic module
    • Non-intrusive calibration through password protection user facility
    • 2 wire or 3 wire technology, user defined BAUD rate for RS-485
    • continuous monitoring of sensor collected data using RS-485
    • User detectable continuous mode time interval, user selectable gas settings
    • User selectable mode of transmission, suitable in Hazardous area
    • Field or wall installation, HART facility / MODBUS (RS 485)
    • Intutive user interface, programmable Relay Reset / Latch
    • Power on Test for LEDs, LCD, last CAL and CAL due date
    • 1MB of EEP-ROM for storing data logs and calibration settings
    • RTC for Date-Time starting from current calendar year

Description

HNL’s field proven micro-controller based, long-life, accurate, gas-specific transmittrs are configured with minimal cross-interference.

The standard transmitter consists of a compact electronic module housed in a weather-proof or explosion proof metallic or polyster box, with an application specific sensor. This state-of-art transmitter is carefully designed and manufacture with industrial grade components for reliability, accuracy and long life. These transmitters are equipped with micro-controller and are optionally featured with self diagnostic, auto-calibration functions through embedded software.

Specification

Display LED for 3 wire only
Resolution % V/V (For Oxygen : 0-25 % V/V), %LEL, PPM, miligram per cubic meter
Environmental Operating Range -20 °C to 50 °C 10 to 90% RH (non condensing)
Power Requirements 18 – 32 V DC (Typically 24 V DC) external power supply
Standard Enclosure Weather-proof: Plastic, Ex-Proof: Cast Aluminium (Zone 1&2, IIA, IIB)
Cable 3 Wire only
Power Consumption Less than 8 Watts (at Max load 600 Ohm)
Keys Manual 3 keys operation, Non-intrusive operation through Magnetic pen for FLP enclosure

Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to hnl’s commitment to research, design and product improvement, specifications are subject to change without notice.

Leave a Reply

Your email address will not be published. Required fields are marked *